Operating instructions K-Laser Blue Dental Rev. ZE
Page 13 of 72
3.3 Wireless footswitch specification
Model designation:
NanoLOC AVR;
Frequency:
2.4 GHz
– 2.4835 GHz (ISM band);
Transmitting power:
< 2 mW (short-range device);
Modulation type:
Multi Dimensional Multi Access (MDMA).
3.4 Transport and storage
The device comes in a box that ensures proper and easy transport.
In its original transport packaging, the device can withstand the following ambient transport
conditions:
Temperatures from - 40°C to + 70°C;
Relative humidity from 10% to 90%;
Atmospheric pressure from 800 hPa to 1060 hPa.
Caution
Do not leave the device in a vehicle parked in the sun. The inside temperature of the car could
thus heat up to a point where individual components may be damaged.
Notice
The rechargeable battery must be fully charged regularly. After six months of no charging
(storage) the rechargeable battery might lose its loading capacity and might not be
rechargeable anymore.
3.5 Operating conditions
The device may be operated in the following environmental conditions:
Temperatures from + 10 °C to + 33 °C;
Relative humidity from 10% to 95%;
Atmospheric pressure from 800 hPa to 1060 hPa.
Caution
Following transport and storage, let the device adapt to room temperature for about one hour
prior to operation to reduce the risk of malfunctions caused by condensation.
