Operating instructions K-Laser Blue Dental Rev. ZE
Page 46 of 72
5.6 Therapy
After choosing a treatment from the list, the following screen appears:
Press it to change screen in order to modify
parameters.
Press it to go back one screen.
Laser armed. After a delay of 2 seconds by this
button pressure, the aiming beam is switched on and
the laser is ready to be used.
Press it to the main menu.
Warning
All persons present in the room must wear the laser protective
goggles as soon as it is advised during use.
Notice
Before starting a laser treatment in battery operation please reconfirm the battery status.
Notice
From the list of the treatments press to remove the treatment, press to rename it.
The user can manage parameters pressing
and the following screen will appear.
Select the field to be modified and then press +/-
Green : selected field.
Grey: not selected field.
Press it to count up and down numerical value.
Press it to go back previous therapy area.
Press it to enter in the numeric keyboard.
Allow to select the wavelengths:
Green: selected field.
Grey-Green: not selected field.
Press it to go back one screen.
Laser armed. After a delay of 2 seconds by this button
pressure, the aiming beam is switched on and the
laser is ready to be used.
Press it to save a treatment.
