background image

8. Meaning of indicator light 

indicator light 

Prompt tone 

Earbuds 

Red  and  white  LED  flash 
quickly alternately 

Pairing mode with phone 

Red  and  white  LED  flash 
slowly alternately 

TWS pairing mode 

White  LED  flashes  every  5 
seconds 

Unconnected 

White  LED  flashes  twice 
every 10 seconds 

Connected 

Red  LED  flashes  four  times 
every minute 

Low battery 

Charging 
case 

White  LED  flashes  every  2 
seconds 

Low battery 

White LED flashes three times 
every two seconds 

Full battery 

White LED kept on 

Has been charged 

 
9. Factory Reset 

When the earbuds are in the pairing mode, five times click the touch button, 
and the factory reset whenthe red LED and blue LED turns on for 1 second. 
At the same time, you will hear prompttone and turn off. 
 
 
 
 
 
 

Five times click the touch button 

 

Remarks: 

 

After factory reset, the paired list of two earbuds as well as earbuds and 
mobile  phone  will  be  deleted.  The  earbud  does  not  automatically 
reconnect the mobile phone and the other earbud after turning on. 

 

After factory reset, when the earbud turns on again, it will automatically 
enter  the  TWS  pairing  mode  (red  and  white  lights  flash  slowly 
alternately).  Two  earbuds  will  be  pairedautomatically.  After  TWS 
connection, left earbuds will continue to wait for pairing with the mobile 
phone (red and white lights flash quickly alternately). 

 

Summary of Contents for BTH171Q

















Reviews: