6.Pair and connect the left and right earphones (when the two
earphones cannot be connected automatically)
1. Put the left and right earphones into pairing state respectively (red and
blue lights flash alternately).
2. When the headset is in the pairing state, press the touch button in 5
consecutive taps, and see that the red light turns to red and blue lights
alternately and slowly flashing after 1 second, which means the headset has
entered TWS pairing mode.
3. After the two earphones enter TWS pairing mode (red and blue lights
alternately flash slowly), the earphones will automatically match and
connect successfully.
Remark:
1. The left and right earphones have been matched and connected before
leaving the factory. Normally, you only need to take the left and right
earphones out of the charging box to automatically power on and connect.
2. If two earphones cannot be automatically connected after being taken
out of the charging box at the same time, you can press this operation to
re-establish the connection between the left and right earphones.
6.Function operation
1. music
Function
Status of
earbuds
L
R
Prompt
tone
Play
Playing
music
Double-click
touch-button
Double-click
touch-button
N/A
Pause
Playing
music
Double-click
touch-button
Double-click
touch-button
N/A
Previous
song
Playing
music
Press Left touch -
button about 2s
N/A
Dang
Next song
Playing
music
N/A
Press Right touch -
button about 2s
Dang
Deep base
Playing
music
N/A
triple-click
Right
touch-button
Deep
base