background image

2.

 

Charging for earbuds 

When  the  earbuds  are  low  on  power,  the  earbuds  emit  “Battery  low”  once 
and thered Led flashes slowly four times every 1 minute. Please recharge the 
battery of the earbuds. 

 

The way of charging for the earbuds as following: 
1.

 

Put  the  earbuds  into  the  charging  case  to  ensure  that  the  charging  case 
connect well, and start charging when you see the red LED of the earbuds 
on. 

Red light on: Charging 
Red light off: Finish charging 

2.

 

Charging should be completed in roughly 1.5 hours. 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

Remarks: 

 

Put left and rightearbuds into the correct position according to the L and 
R marks on the charging case. 

 

Please  cover  the  Top  case,  so  that  the  earbuds  and  the  charging  case 
connect well when it is charging. 

 

The  indicator  light  of  the  charging  case  is  off  when  the  earbudsare  not 
put in  the charging  case. When  the  earbudsare put in  the  charging  case, 
the green LED on the back of the charging case lights up and indicate the 
current  battery  level:  The  green  LED  flashes  every  2  seconds,  once,  2 
times, 3 times and 4 times from low to high.. After removing the earbuds 
from the charging case, thewhite light will automatically extinguish after 
1 minute. 

Summary of Contents for BTH182H

















Reviews: