26
distances or along narrow corridors. Before assembling the machine, lay out an old
blanket, bed sheet or other oil-resistant base to protect the
fl
oor.
3. Screw the front (2) and rear support
pipe (3) onto the primary frame (1)
using the carriage bolts (46), the
domed cap nuts (47), and the shims
(46B).
4. Insert the pedal joint pins (62, 63) in
the pedal support pipes (6L, 6R) and
secure the bolts on the pedal crank
with the nuts (48) and shims (51).
The parts marked with
L
(left) must
be mounted on the left side – viewed
form the workout direction – and
those marked with
R
(right) must be
mounted on the right side. Once
fi
n-
ished, place the caps on the nuts.
CAUTION!
❐
Please note that the right pedal has a right-hand thread and therefore has to be
tightened clockwise while the left pedal has to be tightened counter clockwise (left-
hand thread).
❐
Mounting the individual pedal parts on the wrong side may damage the threading!
5. Mount the pedals (11L, 11R) on the
pedal support pipes (6L, 6R) with
the hexagon screws (44) and nuts
(45).
6. Insert the handlebar axis (12) into the tracks on the right and leftconnecting pipe (4,
5) and the primary frame. Secure the axle with the D-shaped spacer (56), the spring
ring (52), and the socket screw (57).
1
2
3
46
46B
47
4
57
62
51
6R
56
52
48
27
45
44
11
6R
06592_DE-GB-FR-NL_V3.indb 26
06592_DE-GB-FR-NL_V3.indb 26
16.09.2014 11:40:04
16.09.2014 11:40:04
