Permanent days off programmed through special
features will not display on program features OR in
the smartphone/tablet interface
Some users or water conservation programs
may desire that a specific day(s) of the week be
prohibited from watering. The DAY OFF feature
allows the user to select a day or days of the week
where the system will not operate regardless of
SET WATERING DAYS program.
1. Turn the dial to SPECIAL FEATURES. Display
will show “DELAY 0:00.”
2. Press the NEXT button until “DAY OFF” is
displayed and a flashing “MON” in the upper
left corner of the LCD.
3. Press the UP or DOWN buttons to enable (turn
on) the day off feature. The display will now
show a solid (non-flashing) “MON.”
4. Press NEXT to advance to next day of the week.
5. Repeat steps 3 and 4 until all non-watering days
have been selected.
6. Return the dial to AUTO.
NOTE:
All days visible at the top of the display will
become non-watering days regardless of programming.
The Pro-LC program display feature
provides a complete visual overview of
any program contents.
From this one screen the user can see all
programmed Watering Days, the number
of Watering Start Times and Stations with
a run time per each individual program.
1. Turn the Dial to PROGRAM DISPLAY.
2. Use the Program Switch to select the
program (A, B or C) you wish to review.
3. If more than one start time has been set
(maximum of four), they will appear next
to “START TIME” on the display.
4. Press the NEXT button to view any
additional start times.
5. Return the dial to AUTO.
16
DAY OFF
PROGRAM DISPLAY
DAY OFF
mon
1st 8:00
aM
mon tue wed thu fr sat sun
a
pgm
start time 1
station 1 2 3 4
