www.krain.com
CONTROLS AND PUSH BUTTON
03
ERROR/ALARM LED
turns on when one of
the following occurs:
Watering is suspended
by a sensor
The controller senses
a valve short circuit
A programming error
has been made.
PROGRAM DIAL
Used to turn the controller
on and off and to program.
Used to run on Automatic
and to discontinue
watering (OFF)
Used to select desired
controller setting
functions (SET)
Shows total content of
a program (PROGRAM
DISPLAY)
Used to allow setting
controller special
features (SPECIAL
FEATURES)
Used to run single
stations or system
test cycles (RUN)
LCD DISPLAY
Displays the time of day
and day of the week
During programming
shows the results of
entered commands
During watering shows
the valve that is on and
the minutes remaining
in its run time
DOWN / UP BUTTONS
Used to set time / date and to make
program changes.
MANUAL START / NEXT BUTTON
Used to start a selected irrigation
program manually, or to manually
advance watering from one
station valve to the next.
PROGRAM SELECT BUTTON
Used to select watering
program A, B or C.
SENSOR BYPASS SELECT BUTTON
Used to tell the controller to obey
or ignore sensor input.
PROGRAM
SELECT
BUTTON
ERROR /
ALARM LED
SENSOR
BYPASS SELECT
BUTTON
PROGRAM DIAL
MANUAL
START/NEXT
BUTTON
BACK
BUTTON
DOWN
BUTTON
UP
BUTTON
LCD DISPLAY
1
2
3
1
2
3
4
5
6
1
2
3