PREPARE THE HOOD
Note: On stainless steel hoods, carefully remove the plastic protective film from all exterior
surfaces of the hood and decorative flues, prior to final installation.
1. Pick out the hood from the carton.
2. Install the vent into the duct connector of the cooker hood with 4 pcs mounting screws(4*8mm).
3. Put the glass in
the lead way, use
four
screws
(4*25mm)
with
glass washer and
rubber washer to
fix
the
glass.
(Note: the screws
and
washers
should be install
as shown.)
INSTALL THE HOOD
Note: at least two people will be required to
mount the hood.
1. Raise the hood into its mounting position.
2. Fix the hood onto the angle irons with 16
pcs of mounting screws(4*14mm). See
picture as shown.
3. Pull the duct as the direction showed on the
picture, and make it fix onto the vent.
