7
DDS CLOSED CARTRIDGE DAMPING SYSTEM
CHANGING THE FORK SPRINGS
Loosen the clamping screws in the up-
per clamp.
Remove the top cap nut
assembly from the piston rod
joiner using a 14mm spanner and
the 17mm steel spanner provided
-Tool No. 113-010-020.
4.
Remove the nylon spring pusher
and the main spring slowly,
keeping as much oil in the fork leg
as possible.
5.
If a large amount of oil has been
lost removing the spring it is nec-
essary to check the
oil level. To do this you will need
to remove the spring
preload spacer from under the
main spring using a wire hook.
6.
CHANGING THE FORK SPRINGS
