7
5. After removing jack from under the load, push ram
and handle sleeve down to reduce exposure to
rust and contamination.
LOWERING THE JACK
WARNING:
USE EXTREME CAUTION
WHEN LOWERING THE JACK. THE JACK
HANDLE MAY TURN RAPIDLY. OPENING THE
RELEASE VALVE TOO FAST CAN CAUSE
THE JACK TO LOWER RAPIDLY. FAILURE TO
HEAD THESE WARNINGS COULD CAUSE
SERIOUS INJURY OR DEATH.
2. Remove support stands.
1. Raise load high enough to allow clearance for the
jack stands to be removed, then carefully remove
jack stands.
3. Grasp the handle firmly with both hands. Securely
hold on to the jack handle so your hands do not
slip and ensure the release valve does not rapidly
lower.
4. Carefully open the Release Valve by slowly
turning the handle counterclockwise. (Do not
allow bystanders around the jack or under the
load when lowering the jack.)
