36
F. Bicycle Suspension
WARNING: Failure to maintain, check and properly adjust the suspension system may result in
suspension malfunction, which may cause you to lose control and fall.
WARNING: Changing suspension adjustment can change the handling and braking characteristics of
your bicycle. Never change suspension adjustment unless you are thoroughly familiar with the suspension
system manufacturer’s instructions and recommendations, and always check for changes in the handling
and braking characteristics of the bicycle after a suspension adjustment by taking a careful test ride in a
hazard-free area.
Many bicycles are equipped with suspension systems. There are many different types of suspension systems — too
many to deal with individually in this Manual. If your bicycle has a suspension system of any kind, be sure to read
and follow the suspension manufacturer’s setup and service instructions. If you do not have the manufacturer’s
instructions, see your dealer or contact the manufacturer.
If your bike has suspension, the increased speed you may develop also increases your risk of injury. For example,
when braking, the front of a suspended bike dips. You could lose control and fall if you do not have experience with
this system. Learn to handle your suspension system safely. See also Section 4.C.
Suspension can increase control and comfort by allowing the wheels to better follow the terrain. This enhanced
capability may allow you to ride faster; but you must not confuse the enhanced capabilities of the bicycle with your
own capabilities as a rider. Increasing your skill will take time and practice. Proceed carefully until you have learned
to handle the full capabilities of your bike.
CAUTION: Not all bicycles can be safely retrofitted with some types of suspension systems. Before
retrofitting a bicycle with any suspension, check with the bicycle’s manufacturer to make sure that what
you want to do is compatible with the bicycle’s design.
Summary of Contents for K2 BICYCLE
Page 1: ......
