OPERATION
22
Note: in case the temperature measured by the needle probe is lower than the target
temperature, the cycle won’t start and a message will appear on the screen saying “
Start
Cycle failed!
”
3.2 USER MENU
From the HOME PAGE screen, touch the USER icon :
The screen then will display the
USER
menu that includes the
Date&Time
settings menu, the
Language
set up menu, the
USB
options menu,
LAN
network settings menu,
I/O STATUS
menu
and the
Manual
Defrost start cycle
.
3.2.1 USB option
Through the USB port, located on the right side of the Touch Screen frame, it’s possible both to
import and export data from/to a USB stick. There are no special requirement for the type of USB,
however an empty formatted USB with minimum 2 gigs is recommended.
In the
USER MENU
screen, touch the
USB
mark tab then you will be put into the USB options view:
