K40 1000, Installation Instructions

1. Consult with vehicle owner about Pod location. For best

visibility, choose a mounting location as close to the vehi-
cle's gauges as possible.

2. Before mounting the Warning Pod(s), clean both the Pod

surface and desired mounting location on the dash with
isopropyl alcohol. 

3. Position the Warning Pod(s) on the dash with the provided

double stick "O" ring tape. K40-2000P models require the
mounting of a second Pod for rear radar warnings.

4. Route the black cables from the Warning Pod(s) through or

under the dash per diagram C1, and connect according to
the separately enclosed block wiring diagram.

FRONT

WARNING POD

BLACK/COPPER 

DIAGRAM C1

REAR

WARNING POD

WHITE/COPPER 

CLEAR/SIL

VER

BROWN/SIL

VER

BLACK/

SILVER

CLEAR/

COPPER

WHITE/
SILVER

BROWN/
COPPER

FRONT RADAR RECEIVER

(ALL MODELS)

All radar receivers can be mounted behind plastic, rubber, or fiberglass up to 1/4” thick.  Do not mount 
receivers behind metal, carbon fiber, or chromed plastic.

NOTE:

1. Choose a mounting location in

the front of the vehicle that is not
obstructed by any metal, carbon
fiber, or chromed plastic. The
radar receiver can be mounted
horizontally or vertically, provided
the arrows are pointing forward,
towards the road ahead. 

2. Mount the radar receiver to the

vehicle's structure using the 
supplied screws or wire tires 
(see diagram D1).

3. Connect the radar receiver to the 10’ black radar re-

ceiver cable. Align slot on cable plug to the notch on
radar receiver socket, slide the locking ring forward over
the socket, and turn ring clockwise 1/4 turn to engage
safety lock (see diagram D2).

4. Route and affix the radar receiver cable along the inner

fender in the engine compartment to the firewall using
the provided wire straps.

5. Route the radar receiver cable through a factory rubber

grommet on the firewall and into the passenger com-
partment (see diagram D3). Connect wires according to
the separately enclosed block wiring diagram.

DIAGRAM D1

DIAGRAM D2

DIAGRAM D3

RADAR

RECEIVER

SELF-

TAPPING
SCREWS

METAL 

SUPPORT

RADAR

RECEIVER

SELF-

TAPPING
SCREWS

FACTORY

GROMMET

FRONT

RADAR

RECEIVER

CABLE

WHITE

GREEN

BROWN

For added installation convenience, Warning Pods contain both a warning LED and piezo speaker.

NOTE:

WARNING POD(S)

(MODELS:   K40-2000P/1000P)

LOCKING RIB

LOCKING 

WINDOW

LOCKING

PIN

LOCKING

RING

KEY

GUIDE

KEY WAY

LOCKING 

PIN