D
IAGRAM
D5
D
IAGRAM
D4
5. Install the Laser DefuserPlus to the desired mounting surface using included 3/4” screws or nylon mounting nuts
and bolts. See diagram D4. For optimum performance, make sure DefuserPlus is mounted parallel to the ground
as close to the center of the vehicle as possible. See diagram D5.
BRACKET
TAPE
1/4” SCREW
DEFUSER
BRACKET
TAPE
DEFUSER
1/4” SCREW
D
IAGRAM
D3
WITHOUT
HORIZONTAL
TABS
WITH
HORIZONTAL
TABS
3. Determine which holes on the universal mounting brack-
et will be used to mount the Laser DefuserPlus to the car.
Remove the unused mounting holes on the bracket as
needed. See diagram D2.
D
IAGRAM
D2
4. Apply the supplied double stick tape directly to the Laser DefuserPlus and position the DefuserPlus to the
universal mounting bracket with the included 1/4” screws. See diagram D3.
INCORRECT
INCORRECT
CORRECT
WITHOUT
HORIZONTAL
TABS
WITH
HORIZONTAL
TABS