•
Press and hold MUTE button
for 3 seconds to mute
audio for 5 minutes
or
the duration of the alert. Voice will
announce, “Extended Mute On,” and the display will
show
Ext Mute
.
NOTE:
You will only receive new alerts as visual indications
on the display while this feature is engaged.
SPEED MONITOR
Speed Monitor alerts the driver when a preselected speed is
exceeded. Speed Monitor can be set to any speed between
40 - 100 mph in 5 mph increments or 60 - 160 kph in 10 kph
increments.
When the preset speed is exceeded:
•
The RLS2 emits a beeping alert tone accompanied by the
visual display blinking
Slow
then
Down
repeatedly.
•
The alerts will continue until the vehicle’s speed is reduced
to below the Speed Monitor setting.
The factory default setting for Speed Monitor is “Off.”
The factory default setting for Speed Monitor is “mph”
(“mph” may be changed to “kph” in the menu).
To access this function:
•
Press and hold FILTER button
for 3 seconds.
•
Press and release
or
buttons
to select the desired
maximum speed for alerts.
•
Your setting will be saved, the voice will announce, “Speed
Monitor Set,” and the display will return to the main screen.
13
^
^
