KA Security KAS-820-DE User Manual Download

Page: 2 / 15

kas.com.au

Verison: UG_V002

Discover the eTouch Remote Control Keyless Lock

Thank you for choosing KA Security’s

eTouch Remote Control Keyless

Lock.

As you’ll soon discover, this stylish electronic touch screen lock

represents the next generation in security by combining four methods of
access for added security and convenience - choose from pin code,

keycard, FOB or remote control.

The

eTouch Remote Control Keyless Lock

is battery operated, allowing

extra features that add to the lock’s usability - it emits audible and visual
confirmation of lock activation, while its blue backlit screen enables

improved keypad visibility night or day.

This user manual contains vital information to ensure this product is
operated safely and to its fullest potential. Be sure to read instructions

completely before installing or using this product.

e-Touch Technical Parameters

Category

List

Description

Normal power
supply

Normal voltage

DC 6V (4 x AAA Bat.)

Battery life

Over 3000 Times (or 12
months in standby)

Alarm voltage

5.0V 0.2V

Emergency power supply

9V (DC)

Power
consumption

Standby current (without remote) <50 uA
Standby current (with remote)

<80 uA

Normal current

<200mA

Pin code

Pin code capacity

8 pin codes (3 to 6 digits)

Working
environment

Temperature

-10

-> +50

Humidity

15%~95%

Key card/FOB Key card/FOB capacity

Remote
controller

Remote capacity

8 remotes

Normal voltage

3V- Lithium (1 x CR2032)

Summary of Contents for KAS-820-DE
















Search results

Summary of Contents for KAS-820-DE

Reviews:

Related manuals for KAS-820-DE

Brands by name

Popular brands

KA Security KAS-820-DE, User Manual

Search results

Summary of Contents for KAS-820-DE

Reviews:

Related manuals for KAS-820-DE

Brands by name

Popular brands