Do not wait until the battery has completely run out to
charge the battery. Charge the scooter timely when there is
only one or two rectangles left to avoid damage of battery.
BASIC OPERATION
Fold
Speed Control
When the power is on, press the power switch and then the MODE button. The screen will show
the level of speed. press Mode to change the Level (L1,L2,L3).
Step1:
Switch off
Step3:
Fold the handles.
Step5:
Withdraw the extension
17
Step2:
Pull T-tubes to the left and right sides
respectively.
Step4:
Open the locking nut.
Step6:
Unlock the protection pin. Kick down the
folding lever and push the handlebar
forward to fold the scooter.
Always keep protection pin in position
when the scooter is unfolded.
Power Switch
Press the power switch for 3 seconds and the LCD panel will light up, turning the scooter on. If the
scooter is left 90 second unmoved, the power will be off automatically.
Power Indicator
The small rectangles indicate battery power levels.
18
04
