User
settings
Enroll User PIN Code
Access into master mode, press
[1]
for user
setting.Then press
[1]
to enroll user PIN code.
Enter 2 digital user number (00-09),
and confirm with
[#] key
.
Enter user PIN code (6-12 digits
) ,
and confirm
with
[#]
key; Then repeat above operations .
Voice prompt of "settings succeed",
Refer to 1 Cautions.[00-04] : Normal User [05-08] : Temporary User [09] : Duress User
Enroll Fingerprint
Access into master mode, press
[1]
for user
setting.Then press
[2]
to enroll user
fingerprint.
Enter 2 digital user number (00-99),
and confirm with
[#]
key.
Place your finger on the fingerprint sensor,
then
take away your finger after
voice prompt
"
Remove finger and scan again
".
Repeat above
steps
multiple
times
until
voice prompt "settings succeed".
Refer to 1 Cautions.[00-94] : Regular fingerprint [95-99] : Duress fingerprint
Enroll Card
Access into master mode, press
[1]
for user
setting.Then press
[3]
to enroll user card.
Enter 2 digital user number (00-99),
and confirm with
[#]
key.
Place card
on
the card
icon
area until
beep
sound
and
voice prompt
"settings succeed"
.
Notes
Notes
