Kaadas KA250-Z, Installation Manual

Press and hold the Reset Button with the Reset Tool for 5 seconds until you hear the "BEEP".

Settings

Master PIN Code

Auto Lock

Silent Mode

Wrong Code Entry Limit

Shutdown Time

Vacation Mode

Factory Defaut

12345678

Disabled

Disabled

10 times

3 Minutes

Disabled

Remove and re-install the lock, making sure that the thumb turn is in the vertical position.

Make sure that the User PIN Codes are not disabled. If needed, restore the lock’s default settings and 
reprogram the unit.

Make sure the cables are properly connected and the batteries are installed correctly. If the keypad is still not 
responding, replace the batteries with brand new AA alkaline batteries.

Perform a factory reset in order to erase all PIN Codes. Once the reset is complete, all PIN Codes will be 
erased and the Master PIN Code will return to the default (12345678). For security reasons, change the 
Master PIN Code immediately.

The thumb turn cannot rotate.

The lock cannot be locked or unlocked by the keypad.

The lock will give you plenty of alerts to remind you to change the batteries. If they die before you can change 
them, connect a power source to the USB-C Power Port at the bottom of the keypad. This will power the lock 
for you to enter your PIN code and unlock your door. Remember to change your batteries once you have used 
this method.

I forgot to change my batteries, and now my keypad isn't working.

The keypad is not responding to touch.

Forgot your Master PIN Code.