W W W . K A A R T A . C O M
2 6
A B O U T
The About tab lists the lifetime scanning duration, lifetime points collected, device serial
number, current software version, firmware version, date the software was last updated,
and the date the unit was last checked for an update (Figure 11).
Figure 11: The About tab of Contour System Settings
It is important to occasionally connect the device to the Internet, such as through the
internal Wi-Fi or a USB to Ethernet converter. The device will automatically check for
updates when connected to the Internet, but there is also a
Check for Updates
button
here to manually perform a check.
Tap the
Check for Updates
button to search for any software upgrades (must be
connected to the Internet). While Contour searches for new software, you are taken to the
Jobs Queue screen. You will see
New SW Available to Install
if the search was successful.
Click the back arrow in the top left corner of the Jobs Queue to return to Device Settings.
You will then be prompted to update Contour with the new software (Figure 12). Tap Yes to
start the update.