W W W . K A A R T A . C O M
7 3
scanning systems will need to create a keypose file during the importing process (see
Importing a Pointcloud on page 71).
Se l e c t i n g a Pri o r (o r I mp o rt e d ) M ap
To resume from a prior map, enter the Scan Detail screen of that scan and click on the
Resume/Replay tab. This opens a screen that allows you to select a keypose number to
start replay from (Figure 51). The start of a scan keypose number is keypose #0, and the
last keypose being the end of the scan. Any keyposes between those begin and ending
keyposes are manually generated using the
Add Keypose
button during scanning, in the
order they were taken. Alternatively, you can select the location of a prior map from which
to resume scanning by using the sliding bar at the bottom of the scan preview.
Figure 51: Resume/Replay Scan.
After hitting the
Yes
button, the scan cover photo screen opens. You can take a cover photo,
add notes, and change the new scan name here. Press the
Scan Start/Stop
button to
initiate the resume/replay sequence. You need to align the current image (the bottom left
corner of the UI) with the reference image (top left image) (Figure 52). Press the
Play
button
on the right of the screen to resume scanning.