31
Note:
In Dual User access, you should not turn the dial or press
Clear
between combination entries.
To open the lock, complete the following steps:
1.
For a PowerStar version of the lock, power the lock by briskly turning
the dial back and forth in both directions.
2.
If this is a Spindled version of the lock, position the lock dial to the
HOME
position.
3.
Enter the valid combination. If operating in Single User access and the
combination is entered successfully, the lock indicates that it is ready to
open by displaying the following:
Spindled PowerStar
- 1 slow green flash
Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerStar
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
If operating in Dual User access, simultaneous green and red flashes
display.
4.
If operating in Dual User access, enter the second valid combination. If
the combination is entered successfully, the lock indicates that it is
ready to open by displaying the following:
Spindled PowerStar
- 1 slow green flash
Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerStar
- Continuous green flashes for approx. 5
seconds
Non-Spindled PowerSaver
- Continuous green flashes for approx. 5
seconds
Summary of Contents for AUDITCON 100 series
Page 1: ...OPERATING INSTRUCTIONS AUDITCON LOCK 100 200 400 500 SERIES...
Page 56: ...52...
Page 57: ...NOTES...
Page 58: ......
