(P/N) 541.1212 Rev B 07/15 • © copyright 2012-2015
Kaba Mas LLC
Page 10 of 12
DOOR THICKNESS:
SCREW LENGTH:
1.25 1.00
1.375 - 1.75
1.25 (PROVIDED)
1.875 - 2.00
1.50
2.125 - 2.50
2.00
2.625 - 3.00
2.50
3.125 - 3.50
3.00
3.625 - 4.00
3.50
4.125 - 4.50
4.00
DIAL RING INSTALLATION
1. Place the exterior (dial ring) mounting plate cover over the exterior (dial ring)
mounting plate and mount the dial ring using the two #8-32 x 5/16 machined
screws that are provided.
2. Refer to the section on installation of the dial ring in the “INSTALLATION
INSTRUCTIONS FOR THE X-10 TYPE 1F HIGH SECURITY ELECTRONIC LOCK”
booklet for additional dial ring installation instructions.
CUSTOM CUTTING TUBES AND SPINDLE
1. Refer to the sections for cutting tubes and for cutting the spindle in the
“INSTALLATION INSTRUCTIONS FOR THE X-10 TYPE 1F HIGH SECURITY
ELECTRONIC LOCK” booklet for detailed instructions needed to cut the tubes and
spindle to fit your specific installation.
INSTALLATION COMPLETION INSTRUCTIONS
1. Continue to follow the instructions in the “INSTALLATION INSTRUCTIONS FOR
THE X-10 TYPE 1F HIGH SECURITY ELECTRONIC LOCK” booklet for the
remainder of the lock installation. Please note that when those instructions refer to
the
lock case assembly, the installer should consider that as meaning the
CDX-10 unit.
DO NOT REMOVE THE X-10 LOCK CASE FROM THE CD BASE.
