(P/N) 541.1212 Rev B 07/15 • © copyright 2012-2015
Kaba Mas LLC
Page 6 of 12
CDX-10 Installation Instructions
Please read all instructions carefully before you install and use your CDX-10 Lock
Assembly. This will help you avoid unnecessary costs and concerns resulting from
improper installation.
BASIC TOOLS NEEDED
1. Medium Phillip’s screwdriver (#1/#2).
2. Standard hacksaw (32 teeth/inch).
3. Small flat file.
4. Small vise or a Port-A-Vise (Harbor Freight P4742).
5. Drill bits: No. 25, 11/32", 1/2".
6. Electric hand drill.
7. 3/32" hex key.
8. 11/32" Nut driver.
Recommended but not required:
9. Torque screwdriver (30 inch-pound capacity).
NOTE: See Table Of Recommended Torques For The Various X-10 Lock Screws
(Page 1, Installation Instructions For the X-10 Type 1F High Security Electronic Lock).
