Database Preparation
Note
Refer to the Kaba Mas web site to review the appropriate database setup procedures at: www.kaba-mas.com/cencon4.
Set Up the Database
Important Note
Contact Kaba Mas Technical Support regardless of whether you are importing/converting data from a previous installation or doing a new
installation.
The Cencon Database Setup Utility is provided to create and initialize or update a Cencon 4 database on your database server. The Setup Utility is
configured as a ‘Wizard’ type of user interface. It is found on the Cencon 4 Install CD and can be accessed by running it from the via the Start menu.
Warning
If you are importing data from a previous system and you had previously defined software authorizations for your logon users, the old
authorization settings will be deleted in the import process. Record your current authorization settings before importing the data to the new
database. Since the Cencon 4 software uses role based operations as the new method to control access to software functions, you will have to
use/create new role based user authorizations (using the new version of the software) that are based on the old individual software authorization
settings.
Important
The Cencon Database Setup Utility should be run after the Cencon prerequisites have completed (see Step 8 under Software Installation and
Setup).
1.
Select the Start icon from the Windows task bar.
2.
With the Cencon 4 Install CD in the CD-ROM drive, enter the letter designation for the CD-ROM drive followed by
DBSetupUtility\CenconDBSetupUtility.exe as shown below. You can alternatively select the location via the Browse button.
3.
Click on the OK button.
The first window of the Cencon Database Setup Utility is displayed:
Page 28
Document # 2070.127 Rev. C 4/10 Cencon 4 Getting Started Guide