Document Number 548.0418 Rev. AX — 02/2019
5
Introduction
Installation Overview
The
DKX
-10 Lever Release consists of:
1. A Cylindrical Lockset (Best 9K) prepped for Small Format Interchangeable core (less core). Other cylinder
configurations available.
2. A modified High Security Pedestrian Door Lock (CDX-10)
3. Interface Hardware, Covers and Cover Brackets
NOTE:
Open box, lay out all parts and verify prior to beginning installation.
The Installation Guide will describe the steps required to install each component of the
DKX
-10 Lever Release Lockset.
Before beginning installation, be certain to have the following tools readily available:
• Measuring tape
• Level and straight edge
• Combination square
• Tape
• Hammer
• Center punch
• Electric hand drill
• 1/8" drill bit
• 1/4" drill bit
• 9/32" drill bit
• 5/16" drill bit
• 3/8" drill bit
• 1/2" drill bit
• #16, #21, and #25 and 7/16" drill bits
• 2 1/8" hole saw with 1/4" pilot
• 1" hole saw with 1/4" pilot
• Long nose pliers
• Pliers
• Adjustable wrench
• 3/8" box-end wrench
• Hacksaw
• File
• 1/4" or smaller slotted head .0. screwdriver
• #1 Phillips head screwdriver
• #3 Phillips head screwdriver
• #1 Phillips head stubby screwdriver
• Safety glasses
Other tools which may be required:
• #10-24 Screw cutter
For a metal door installation, the following tools are needed:
• Tap handle
• #10-24 tap
• #10-32 tap
• #12 - 24 tap
Summary of Contents for DKX-10
