7
E
LECTRIC
L
OCKING
T
RIM
S
PECIFICATIONS
The Electric Locking Trim (
ELT
) feature is available from Kaba Mas as a Special Engineering request (SER)
based on the Model 1000 High Security Pedestrian Exit Device. This feature includes a Relatching Delayed
System (
RDS
) with power supply and control module.
The
ELT
feature provides control capabilities of trim lock/unlock by a guard or security system while allowing
free egress at all times. The
ELT
system can be activated to hold the trim unlocked momentarily or for
extended periods of time.
The
ELT
feature can be interfaced with automatic doors, card readers, automatic fire alarm systems, etc.
The
ELT
application requires the use of the
RDS
control module. For details on the
RDS
, see the section
below. Closing the normally open dry contact retracts the latch. Opening the normally open switch returns the
latch to the locked position.
RDS - Power Supply Control Module
The
RDS
, when energized by pressing the dry contact switch, will activate the first
ELT
device and one
second later, will activate a second
ELT
device. Please note that for each
RDS
, two
ELT
devices can be
controlled by one switch.
Notes:
1.
Each
RDS
comes in a 6” x 6” x 4” NEMA rated box.
2.
RDS
weight is 8 lbs.
3.
The RDS-2 specifications and wiring schematic can be found in the
Electric Locking Trim & RDS
Installation
section of the manual.
