10
Figure 17 - Peel backing from keypad
decal
25. If the lock does not operate successfully, carefully unscrew the keypad
assembly and check the flex cable connection. Also ensure that the flex
cable is not getting pinched.
26. After you have successfully tested the lock operation, ensure that the
keypad mounting screws have been tightened.
27. Peel the adhesive backing from
the left and right sides of the
keypad decal and apply the
decal to the keypad assembly
(Figure 17).
Note:
The lock will not open if
excessive force is applied to
the end or side of the bolt.
The installer should check for
these conditions after instal-
lation.
