2
Basic Tools and Materials Needed
•
Medium (#2) and Small Phillips head screwdriver (magnetized tip recom-
mended)
•
Fine pitch hacksaw (32 teeth/inch)
•
Small flat file
•
Pliers
•
All-purpose scissors
•
Tape measure or ruler
Recommended, but not required
:
•
Torque screwdriver (30 inch-pounds/3.4 newton-meters capacity).
Table 1 - Recommended Torques for Lock Screws
Application
Screw
Screw
Torque
Torque
P/N
Size
in Lbs
N-M
Dial assembly mounting
305089
8-32
17 to 20
1.9 to 2.25
screws
Keypad assembly mounting 305110
6-32
snug
snug
screws
Lock case mounting screws 105195
1/4-20
25 to 30
2.8 to 3.4
Template
A template is provided as an aid for locating, drilling, and tapping the lock
mounting screw holes relative to the spindle hole. Since the lock is designed
to fit most industry standard container lock mounting screw hole patterns, the
need to use this template should be minimal.
