1
1
I
NTRODUCTION
Please read all instructions before you install and use your Model X-09 lock. This will
help you avoid unnecessary costs and concerns resulting from improper installation.
BASIC TOOLS AND MATERIALS NEEDED
1. Small Phillips head screwdriver (#0)
2. Medium Phillips head screwdriver (#1/#2)
3. Standard hacksaw (32 teeth/inch)
4. Six inch metal scale or ruler
Recommended, but not required:
5. Small fl at fi le
6. Small vise
7. Torque screwdriver (30 inch-pound capacity), or
8. Standard torque wrench with screwdriver bits
Note:
See table of recommended torques for the various X-09 lock
screws.
All other necessary tools and materials are provided.
X-09 LOCK PARTS FOR INSTALLATION
1. Lock Assembly
2. Dial Ring
Assembly
3. Dial Assembly
4. Spindle
5. Dial Hub
Assembly
1
2
3
4
5
TABLE OF RECOMMENDED TORQUES FOR THE VARIOUS X-09 LOCK SCREWS
Applications
P/N
Screw Size Torque (In.Lb.)
Lock Case Cover
105030
6-32
9.0 to 11.0
Dial Ring Mounting
105034
8-32
17.0 to 20.0
Dial Ring Cover
105034
8-32
17.0 to 20.0
Lock Case Mounting
105046/105195
1/4-20
25.0 to 30.0
Figure 1 - X-09 Lock Parts