Date Feb. 10, 2016
page 2 of 3
Mounting instructions 70040 VAROS
Install the Kaba Mauer escutcheon follow the footprint given in sketch 2.
sketch 2: escutcheon footprint, all dimensions in mm (inches)
Installation of the Kaba Mauer guiding tube:
The key hole in the door of the secure storage unit has to be dimensioned between 11 and 13 mm (following DIN 2768-
mH), considering the outer diameter of the tube shown in sketch 3,
the secured area given in sketch 4 and the security
requirements of the secure storage unit. According to sketch 4, all areas outside the given zone have to be protected by
the armoring of the secure storage unit.
During the installation and adjustment make sure that the key guiding tube gets properly put onto the two round projections
on the lock case as well as to the round groove of the key hole cover. Please take care that after installation the key
guiding tube is in a 90° angle to the lock and the escutcheon (see sketch 5: section of mounting situation).
Length (L) of the key guiding tube in mm:
L = X +
2,4
[+0/-0,5] mm
Length (L) of the key guiding tube in inches:
L = X + 0,095 [+0/-0,019] inches
(see sketch 5).
sketch 3: key guiding tube, all dimensions in mm (inches)
sketch 4: security zone of the lock
,
sketch 5: section of mounting situation,
all dimensions in mm (inches)
all dimensions in mm (inches)
After the installation make sure that the key can be easily inserted into the lock and turned with minimal force and without
binding.
