18
k1evo805en-2012-09
Kaba digital cylinder
Installation
User manual
5
Installation
This section describes the process of installing the digital cylinders in doors.
Two installation variants are available, with the variant selected depending on the type of
digital cylinder, its profile and the type of door furniture (with or without profile cutout).
5.1
Tools required
• Kaba service tool, item number 1430-25
• Hexagonal screw, hex 1.5 mm, item number 1430-55
• Cross-head screwdriver for forend locking stud, size PZ 2
5.2
Installation variants
With installation variant A, remove the inner door knob and push the cylinder through the
door furniture and the lock, from the outer side of the door.
With installation variant B, remove the outer door knob and also the inner door knob if
necessary, and push the cylinder housing through the door's lock.
1)
The furniture on the inner side requires a recess for the bridge.
Variants
Type
A
B
1435
Standard
recommended
optional
1434
Half
--
optional
1437
1)
Anti-panic
recommended
optional
1439
Dual
--
recommended
1535
Standard
not recommended
recommended
1534
Half
--
optional
1537
1)
Anti-panic
not recommended
possible
1)
1539
Dual
--
recommended