38
k1evo805en-2012-09
Kaba digital cylinder
Programming
User manual
Import data from digital cylinder
into programmer.
In the case of import, the
programmer reads the
configuration data from the digital
cylinders.
There are 3 different data types
available for selection in the Import
menu:
• Info (status data)
• Traceback
• Configuration
The existing configuration data for the digital cylinders stored on the programmer
will be overwritten following confirmation.
1. Press Import menu
key.
2. Log in
to the digital cylinder
using the programming master.
3. Select the Configuration menu
and confirm this with the ENTER
key.
4. The configuration of the digital
cylinder will be read out and
confirmed.
The traceback and the configurations must be transferred to the higher-level
software so they can be evaluated by the programmer.
