Basic safety information
Operating Manual
8
k1evo821 - 201606
Kaba mechatronic cylinder surface
Round profile
2.5
ESD protective measures
NOTICE
Danger of damage to electronic components from electrostatic discharge.
If electronic printed circuit boards and components are handled incorrectly, damage
may occur which leads to their complete breakdown or sporadic faults.
•
When installing and repairing the product, the general ESD protective measures
are to be observed.
•
When handling electronic components, wear the ESD wrist strap. Connect the
end of the strap to an ESD socket or an unpainted, earthed metal component.
This will safely and effectively conduct charges away from your body.
•
Only handle the edges of printed circuit boards. Do not touch printed circuit
boards or connecting plugs.
•
Put removed components on an anti-static surface or in an anti-static shielding
container.
•
Avoid contact between printed circuit boards and clothing. The wrist strap only
protects the printed circuit boards from static electricity on the body. Damage
can still occur due to static electricity on clothing.
•
Only transport and ship removed modules in ESD-shielding, conductive protect-
ive containers.
2.6
Handling of lithium batteries
NOTICE
Lithium batteries can explode or burst explosively.
Improper handling of lithium batteries can lead to fires and explosions.
•
Only replace lithium batteries with batteries of the same type.
•
Do not open, drill through or squash lithium batteries.
•
Do not burn lithium batteries or expose them to high temperatures.
•
Do not short circuit lithium batteries.
•
Do not recharge lithium batteries.
