4000 Programmable Electronic Pushbutton Lock
4 0 0 0 P r o g r a m m a b l e E l e c t r o n i c P u s h b u t t o n L o c k • P K 2 9 7 1
P a g e 1 8
The lock can be opened without an access code.
The lock is in passage mode.
Program the lock to disable the passage mode (command code 400), if desired.
When a valid access code is entered, the lock unlocks but it alternately flashes the
green and red lights during the unlock time period instead of just the green light.
This is the low battery indicator. The lock batteries are weakening; however, the lock
will continue to operate for up to 2 000 openings after the first warning.
Replace all four AA alkaline batteries with new batteries.
No sound is heard from the lock when access codes are entered—when a
pushbutton is pressed or access is granted.
The buzzer volume is set to too low or off.
Program the lock buzzer to a higher volume setting (command code 701 to 709).
Certain users can enter a door, which is in lockout mode.
These users are Privileged users.
Change the users' status from "privileged" to "normal" by changing the setting for their
entire user group (command 96).
Leave the users as "privileged", but disable all codes temporarily in order to fully
lock out all users (command 000)
APPENDIX
Environmental Specifications
Outside Housing:
Operating temperature:
-35
º
C to +66
º
C
Humidity:
100% condensing
Rain proof / Dust proof
Inside Housing:
Operating temperature:
-35
º
C to +66
º
C
Humidity:
100% condensing
Rain proof / Dust proof
Certifications and Approvals
• ANSI grade 1
• ANSI / BHMA A.156.2, A.156.13 and A.156.25
• UL part 10B fire rating
• CRF 47 part 15
• EMC directive 89/336/EEC
?
?
?
?
