General Rules and Information
10
TM_ RegistrationUnits_201406_en.docx
3
General Rules and Information
The registration units can be used in a wide range of Kaba system solutions (Kaba exos, B-COMM,
KEM).
3.1
Topologies
The separation of the registration units from the control unit facilitates various antenna designs. With
the help of suitable housing, the antennae can be adjusted to the spatial and security-related
requirements of a building.
The registration units 90 02 is used for entering the personal PIN code. It is therefore particularly
suitable for external access or installations with increased security requirements. It can be retro-fitted at
any time with no or minimal wiring changes.
The different antenna variants allow different RFID reading-writing distances to be achieved. The
properties also result from local events and the identification medium used.
Tampering Security
The registration units are separate from the hardware (reading devices). Regardless of the mounting
location, the associated control unit can be installed in a tamper-proof room.
Manipulation Security
The communication between registration unit and associated control unit is encrypted and therefore
offers optimal security.
3.1.1
Access Management System MIFARE / LEGIC
