Basic safety information
Installation Manual
8
k2evo702 - 201610
Kaba c-lever and variants
2
Basic safety information
This product has been built according to the latest technology and accepted safety
regulations. Nevertheless, handling this product can pose a risk to people and prop-
erty.
Read and observe the following safety information before using the product.
2.1
Proper use
This product has been designed exclusively for use as set out in the chapter Product
Description. Any other use will be deemed improper use. The manufacturer accepts
no liability for any resulting damage. The user/operator bears sole responsibility for
the risk.
2.2
Product changes
NOTICE
No changes should be made to the product, unless in accordance with changes de-
scribed in the instructions.
2.3
ESD protective measures
NOTICE
Danger of damage to electronic components from electrostatic discharge.
If electronic printed circuit boards and components are handled incorrectly, damage
may occur which leads to their complete breakdown or sporadic faults.
•
When installing and repairing the product, the general ESD protective measures
are to be observed.
•
When handling electronic components, wear the ESD wrist strap. Connect the
end of the strap to an ESD socket or an unpainted, earthed metal component.
This will safely and effectively conduct charges away from your body.
•
Only handle the edges of printed circuit boards. Do not touch printed circuit
boards or connecting plugs.
•
Put removed components on an anti-static surface or in an anti-static shielding
container.
•
Avoid contact between printed circuit boards and clothing. The wrist strap only
protects the printed circuit boards from static electricity on the body. Damage
can still occur due to static electricity on clothing.
•
Only transport and ship removed modules in ESD-shielding, conductive protect-
ive containers.
