Installation instructions
Please read first
Kaba c-lever
k2evo702en-2012-05
5
1
Please read first
1.1
Validity
These instructions describe installation, maintenance and troubleshooting tips
for the Kaba c-lever and are valid for the 2621 MID, 2622 MID, 2623 MID, 2624
MID, 2621 LEA, 2622 LEA, 2623 LEA and 2624 LEA variants.
1.2
Target group
These instructions are intended for specialist staff involved in the assembly,
installation, set-up, servicing and maintenance of this product.
The description is intended for trained personnel and does not replace product
training.
1.3
Content and purpose
The content of these instructions is limited to the installation and maintenance
of the Kaba c-lever. Detailed information about programming can be found in
the supplementary documentation.
1.4
Supplementary documentation
Technical information and help in the planning of installations can be found in
the technical data sheets and the Kaba evolo catalogue.
Detailed information about programming this actuator can be found in the Kaba
Programmer 1460 and Kaba evolo Manager user manual.
1.5
Attention and warning symbols
The following attention and warning symbols, which point out hazards and
special characteristics, are used in these instructions.
Pay attention to these hazard notes. They help to avoid accidents and prevent
damage.
