21
Required User Level: Master
T-1
Put the lock into Pushbutton Programming Mode.
T-2
Enter Command
401#
to de-activate a Manager Access Code.
T3
Enter the code
401#NNN#
, where
NNN
is the specific Manager ID
location,
024
for example.
T-4
Example of complete entry:
401#024#
.
T-5
Enter another
#
to indicate the end of programming.
T-6
You have now de-activated a Manager Access Code.
U. DE-ACTIVATE SERVICE USER ACCESS CODE
A Service User Access Code should be de-activated for a certain time period -
during a Service User’s absence, for example, or if you created an Access Code
but have not yet assigned it to a Service User. A Service User’s time period
continues to decrement if the User has only been de-activated, not deleted.
Required User Level: Master, Manager
U-1
Put the lock into Pushbutton Programming Mode.
U-2
Enter Command
402#
to de-activate a Service User Access Code.
U-3
Enter the code
402#NNN#
, where
NNN
is the specific Manager ID
location,
025
for example.
U-4
Example of Complete Entry:
402#025#
.
U-5
Enter another
#
to indicate the end of programming.
U-6
You have now de-activated a Service User Access Code.
V. DE-ACTIVATE ALL ACCESS CODES
EXCEPT MASTER AND MANAGER
You may need to de-activate all users, for example, during a plant shutdown.
This procedure will de-activate all regular User Access Codes that are active,
excluding Master and Manager Codes.
Required User Level: Master, Manager
V-1
Put the lock into Pushbutton Programming Mode.
V-2
Enter Command
498#
to de-activate all Access and Service Codes.
V-3
Example of Complete Entry:
498#
.
V-4
Enter another
#
to indicate the end of programming.
V-5
You have now de-activated all regular User Access Codes.
Summary of Contents for E-PLEX 2000
Page 1: ...Operations Manual E PLEX 2000 Series E PLEX PowerStar 2000 Series...
Page 30: ...28 Notes...
Page 31: ...29 Notes...
