2
3
TABLE OF CONTENTS
Model E5031
Assembly Drawing (Model E5031)
3
Tools Required
3
A. Door Preparation
4
B. Lock Handing
5
C. Door Thickness
5
D. Installing Outside Unit Assembly
6
E. Installing Inside Unit Assembly
6-7
F. Installing Inside Lever/Knob
7
G. Changing Key-In-Lever/Knob (KIL/KIK) Cylinder
8-9
H. Installing / Removing Outside Lever/Knob
9-10
(Key-In-Lever/Knob Models)
I. Installing / Removing Outside Lever/Knob
10-11
(Interchangeable / Removable Core Models)
J. Installing The Battery Pack and Cover/
12
Changing Batteries
K. Testing Lock Operation
13
L. Reset Function
13-14
M. Installing Strike
14
N. Installing Rubber Bumpers
15
Inside Lever
Battery Pack
Allen Wrench
Battery Pack Cover
Mounting Screws
LectroBolt
Inside Unit
Assembly
Outside Unit
Assembly
Outside Lever
Assembly
3
/
4
" (18 mm) Screws
Latch
1" (25 mm) Screws
Security Screw Tool
Set Screw
Release Tool
ASA Strike
Battery Cover Screws
The E-Plex 5031 is a non-handed lock that is preassembled for
left-hand installations. It is field reversible.
Warning
The Master Code of this lock has been factory preset: 1,2,3,4,5,6,7,8. To
activate lock functions, the master combination must be changed at time
of installation.
Warnings and Cautions
Important
: Carefully inspect windows, doorframe, door, lights, etc. to
ensure that the recommended procedures will not cause damage. Kaba
Access Control’s warranty does not cover damages caused by installa-
tion.
Caution
: Wear safety glasses when preparing door.
TOOLS REQUIRED
• Safety glasses
• Electric drill (variable speed)
• Awl or center punch
• 2
1
⁄
8
" (54 mm) hole saw pilot drill
• 1" (25 mm) hole saw pilot drill
•
1
⁄
4
" (7 mm) drill bit
• 1" (25 mm) wood chisel
• Hammer
• Phillips head screwdriver
• Small flat blade screwdriver
For technical assistance please call
1-800-849-TECH (8324) or 336-725-1331
