1.877.468.3555
www.ilcosupport.com
7
10
11
12
13
8
9
Connect privacy switch to PCB. Location
as shown
Assemble new cam. Move switch lever
(see arrow) first and assemble cam after
Remove protective bracket
Assemble back plate with 5 screws
Assemble battery pack with screw
Assemble the switch holder, pass the wires
underneath it. Make sure the screw head is
underneath as shown.
Assemble privacy switch on switch holder
Switch lever orientation
Screw Head
Place Cam
orientation as shown
Align cam &
back plate
Pass cables
through back
plate hole
Side contact
Be careful that the spring does not jump and is still in its position
5X
Align marks
790/79 Series Rework Installation Sheet
PK3612_07_12
All manuals and user guides at all-guides.com
