32
User Information Retrieval Via SA Key
The process for retrieving User information is the same as that for retrieving audit information (The only difference is
that the SA key has been initialized to retrieve User information rather than audit information). To retrieve in for ma tion:
Step
Detailed Instructions
1.
Power lock.
Power the lock by depressing the outside lever.
2.
Enter Master User or a
Enter the Master User or a Manager User combination. The lock will beep/
Manager User combination.
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
fol lowed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate avail able entry. If the com bi na tion is not valid, the lock re sponds with
three beeps/flashes of the red LED.
3.
Press then 01.
Before re-lock time expires, press (Enter key) followed by the 0 key and
then the 1 key again. The lock responds with one beep/flash of the green
LED every second until the SA key is inserted into the lock key reader.
4.
Insert SA Key into Key reader.
Insert the SA Key into the lock key reader.
Note: If at any time during the procedure the lock power drops below a sufficient level for operation, the lock
will continually beep and flash the red LED, prompting the user to depress the outside lever to provide additional
power within five seconds.
5.
Ensure lock remains powered
Ensure that the lock remains powered and the SA Key remains in the reader
and SA Key remains in reader
until the lock has com plet ed down load ing the reporting data. Upon compl-
until complete.
tion reporting data. Upon com ple tion, the lock responds with two simultane-
ous beeps/flashes of the green and red LEDs.
The lock user table has now been downloaded to the SA Key.
User Information Retrieval Via Palm Organizer
Step
Detailed Instructions
1.
Connect Palm Organizer
Connect the Palm Interface Module to the lock using the interface cable.
to lock
2.
Power lock.
Power the lock by depressing the outside lever.
3.
Enter Master User or a
Enter the Master User or a Manager User combination. The lock will beep/
Manager User combination.
flash the green LED on each keystroke entered. If the Clear key is pressed
during data entry, the lock responds with one beep/flash of the green LED
fol lowed by the red LED, and all digits of the combination must be re-
entered. The lock responds with three beeps/flashes of the green LED to
indicate available entry. If the com bi na tion is not valid, the lock re sponds with
three beeps/flashes of the red LED.
4.
Press then 6.
Before re-lock time expires, press (Enter key) followed by the 6 key. The
lock re sponds with one beep/flash of the green LED every second
until the Palm interface cable has been in sert ed into the lock communication
con nec tor.
5.
Retrieve user information.
Turn on the Palm organizer and tap the Connect to Lock button at the bot-
tom of the Main Menu. Tap the Get User Table button on the top of the
Connect to Lock menu. After all audit records have been retrieved, tap the
Dis con nect button at the bottom of the Connect to Lock menu. Upon comple-
tion of the Palm operations, the lock responds with two simultaneous
beeps/flashes of the green and red LEDs.
6.
View user information on
To view user information on the Palm Organizer, select the report to view by
Palm Organizer.
tapping the description of the transaction. The line will highlight to show the
transaction selected. Next, tap the View button at the top of the screen. The
View form will display. The type of data will be displayed in the Title Bar. The
Summary of Contents for PowerLever 455 Series
Page 1: ...PowerLever 455x Operating Instructions...
Page 37: ...37 Notes...
Page 38: ...38 Notes...
Page 39: ...39 Notes...