Kaba PowerLever PROX 9000, Quick Reference Manual

1

I

NTRODUCTION

This guide provides a quick summary of information necessary for the operation of
the PowerLever PROX 9000 Series system.  Prior to using the Quick Reference
Guide, you should have completed all activities outlined in the 

Getting Started

Guide

. The Quick Reference Guide is intended to cover the basic operational

functions of the lock at the keypad. For more detailed information on the entire
system, refer to the 

PowerLever PROX 9000 Series Reference Manual

.

System Components

Locks

PROX Cards

PC & PowerLever PX Software

M-Unit & LockCom PX Software

Lock Modes

A lock can operate in one of 3 different modes:

Default Factory Mode

The lock is shipped from the factory in Default Factory Mode and is opera-
tional after being installed. The lock can only be opened with the Default
Factory Master User PIN of “12345678”.

Construction (Temporary Activated) Mode

The lock can be switched from Factory Mode to Construction Mode manu-
ally and can operate without interfacing with the PowerLever PX Software
via the M-Unit. When in Construction Mode, PROX Cards can be enrolled
for access to the lock. The lock can only be opened via the presentation of
the PROX Card, although the Master User PIN is also authorized to open
the lock in this mode. For detailed information on how to operate the lock in
Construction Mode, refer to the 

Construction Mode Operations

 sheet that

was shipped with the lock.

Activated Mode  (Using Software)

When lock and lock user data is defined at the PC using the PowerLever
PX Software and then uploaded to the lock via the M-Unit, the lock is
considered to be in Activated Mode. When in Activated Mode, the default
method of lock access is PIN and PROX Card, but access can also be set to
require only a PIN or only a PROX Card.