Kaba PowerLever PROX 9000, Quick Reference Manual

3

Lock Responses

The tables below summarize how the red and green LEDs are flashed individually,
simultaneously, or in combination to indicate various conditions. Each LED flash is
accompanied by a beep for audio reinforcement.

Flashes

Green LED

Red LED

Continuous Present Card

Low Power

1

Keystroke Entry

2

Input Accepted/DST Activated

General Error

3

Lock Ready to Open/

Bad Attempt to Open

PROX Added Manually

4

Standard Time Activated

Flashes

Green / Red Sequence

Simultaneous Green-Red

Continuous Download in Progress

1

Clear Key Depression

Lock Powered

2

Device Error **

Procedure End; Re-lock or
Tamper Shutdown Expired

**

Contact PowerLever Technical Support for assistance.

•

One simultaneous flash of the green and red LEDs accompanied by a beep
indicates that the lock is powered for opening.

•

When power drops below a sufficient level for operation, the lock will continually
beep and flash the red LED. At this point, the operator has 5 seconds in which
to regenerate power to a sufficient level before the lock will systematically
shutdown. To regenerate power, depress the outside lever fully and then
release it.

•

After each accepted step of an operation, two flashes of the green LED display
and two beeps sound, prompting you to enter additional information for the next
step of the operation. 

The User must wait for these prompts before proceed-

ing.

•

After you have completed all the steps of an operation, two simultaneous
flashes of the green and red LED display and two beeps sound if the operation
is successful. Two red flashes display and two beeps sound if the operation is
unsuccessful, and you will need to re-key the operation which caused the error.