4
DETERMINING THE HAND OF YOUR DOOR
Many of the installation instructions refer to
the handing of your door. The hand of the door
is determined with the door in the closed position,
from the exterior or pushbutton side of the door.
A) Right Hand Door. Door opens inward
(push). Hinged on the right side.
B) Left Hand Door. Door opens inward
(push). Hinged on the left side.
C) Right Hand Reverse Door. Door opens
outward (pull). Hinged on the right side.
D) Left Hand Reverse Door. Door opens
outward (pull). Hinged on the left side.
A.
CHANGING THE DOOR HANDING
A-1
For the outside unit assembly, remove the rubber plug from the outside
lever, exposing the lever set screw.
A-2
Using the hex wrench supplied, remove the
set screw from the lever in question.
A-3
Remove the lever and rotate it 180º. Slide the
lever back onto the lock.
A-4
Using the hex wrench supplied, reinstall the
set screw. Assure the lever rotates freely.
A-5
Reinstall the rubber plug, which was removed earlier.
A-6
For the inside unit assembly, turn the unit over
so the back side is facing up.
A-7
Remove the 4 screws securing the cover plate
to the assembly. Then lift the cover plate and
set aside.
A-8
Lift the stop plate ring and position it accord-
ing to the pictures to the right for this application.
A-9
Resecure the cover plate using the 4 screws
removed earlier.
A-10
Remove the rubber plug from the inside lever,
exposing the lever set screw.
LH - Left Hand
RH - Right Hand
LHR - Left Hand Reverse
RHR - Right Hand Reverse
A
B
C
D
All units are factory handed for right
hand doors.
