7 1 0 - 1 1 / S M A RT R e t r o f i t I n s t a l l a t i o n I n s t r u c t i o n s • P K 2 9 4 3
P a g e 1 2
Inside Housing
Step by Step Instructions (cont)
Mortise
Hand
Thumbturn Position
AMM
RH
R
LH
L
AMM Auto-Deadbolt
RH
R
LH
L
SMM
RH
L
LH
R
If there is no groove on the thumbturn or R/L marking
on the inside housing, the orientation is not important.
Simply ensure the thumbturn is vertical.
thumbturn
vertical
align groove with
correct mark
IMPORTANT NOTES:
Always re-install the lock components on the same door from which they were taken.
If you disconnected the battery,
you will need to reset the lock time to restore the lock to a
working condition (see reference manual).
Check the following table for the correct positioning of the thumbturn before reinstalling:
