7 1 0 - 1 1 / S M A RT R e t r o f i t I n s t a l l a t i o n I n s t r u c t i o n s • P K 2 9 4 3
P a g e 2
Kit Contents
!
!
Warning:
Installation of this kit by the end
user may cancel the complete lock
warranty.
Kaba Ilco is not responsible
for any damage caused by installation.
Kit part #062-510479-XXX
1. Short extension spring
2. Long extension spring
3. Short half-spindle
4. Spare retaining ring
5. Sleeve
6. Insert
7. Knob
NOTE:
The Solitaire 710-II
outside housing is
illustrated throughout
these instructions. The
same steps apply to
the SolitaireSMART (740)
outside housing, with
only minor differences
in the appearance of
the trim.
LOCK HANDING
Before installing the
knob, remove the lock
from the door and
check the handing of
the outside housing.
IMPORTANT: DO NOT install the knob
on the insert before instructed to do
so.
The retaining ring (4) will be difficult to
install if the knob (7) is already assembled
on the insert (6).
Left-hand
LH
Right-hand
RH
