Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
17
The line connectors of the items for taping are inserted in the line clamp. The line clamp is
also used to clamp the lines.
14. Signal lamp tower
This indicates the status of the machine.
15. Compressed-air maintenance unit
At the compressed-air maintenance unit, there is a connection point for the compressed-air
supply for the machine. Also the compressed-air setting can be adjusted there.
16. Lifting column
Used for electrically-controlled height adjustment of the taping machine.
17.
“Clamp” button on left side
This button is used to activate the line clamp.
18. Safety light barrier
The safety light barrier prevents persons reaching into the machine while it is running.
19. Clamping unit with tensile force monitor
The clamping unit is used to set up the machine according to the length of the line sets to be
processed. Tensile force monitoring prevents the lines and conductors sustaining damage
during the clamping and taping processes.
20.
“Clamp” button on right side
This button is used to activate the line clamp.
21. Main switch
The main switch is used to switch on and switch off the power supply to the machine.
22. Fan
The fan serves to cool and ventilate the electronics section of the control cabinet.
