Translation of the original operating manual for the KTS SpeedTec mini
B|HM0SM|00001|V0006|EN
Page
30
Parameter
Description
Unit
Value range / status
min.
max.
Start position
Start point of winding path
mm
-15
800
Initial layers
Number of tape layers (non-
angled windings) at
beginning of taping process
---
0
9
Event pos.
mm
0
800
Target pos.
mm
0
800
Speed
rpm
0
2000
Feed distance
Traversing distance of linear
arm per winding head
revolution
mm/rev.
0
25
Final layers
Number of tape layers (non-
angled windings) at end of
taping process
---
0
9
Overrun position
Point beyond end position for
overrun, allowing tape to be
properly aligned and correctly
cut at end of taping process.
mm
0
50
Final speed
rpm
100
2000
Tensile force
Tensile force of line clamp
N
10
50
Offset, winding aid
Speed of winding aid as
fraction of speed of winding
head, expressed in %
%
0
100
